R-CAS-V VINYLESTER SPIN-IN CAPSULES FOR THREADED RODS 20MM

RAWLPLUG

Regular price R 96.21

SKU: RAW R-CAS-V-20
Tax included. Shipping calculated at checkout.

Create quote
R-CAS-V Vinylester capsule resin for concrete

Capsule for 20mm threaded rod

[Qty: 6/Box]

R-CAS-V VINYLESTER SPIN-IN CAPSULE

High-performance, quick-setting, styrene-free vinylester resin for concrete. Spin-in capsule for threaded rods where extreme strength is required.

QR for installation

Features and Benefits:

  • Approved for use with threaded rods in non-cracked concrete (ETAG001 Option 7)
  • High performance for use safety critical application - heavy-duty fastenings with small spacing and edge distances
  • The system relies on the adhesion between the concrete and resin, which is free from expansion forces. This makes it an ideal choice where close edge and spacing distances are required
  • Capsule contains precise amounts of ingredients making it a very consistent product
  • Suitable for making fixings underwater. Adhesive strength is not affected by unpolluted water
  • Suitable for dry or wet non-cracked concrete
  • Styrene free - odourless

Applications

  • Threaded rods
  • Balustrading
  • Railings
  • Heavy machinery
  • Structural steel
  • Steel columns
  • Cladding restraints
  • Curtain walling
  • Fencing & gates manufacturing and installation
  • Formwork support systems
  • Garage doors
  • Guard rails

Base materials

Approved use in:

  • Non-cracked concrete C20/25-C50/60
  • Natural Stone

Installation guide

       
  1. Drill hole to the required diameter and depth for socket size being used.
  2. Clean the hole with brush and hand pump at least four times each. It is very important and necessary before installation.
  3. Insert capsule into the hole. Connect stud to drilling machine using appropriate driver system.
  4. Position the stud into the glass capsule then switch on the drilling machine and drive stud into the capsule. Switch off the drilling machine as soon as the bottom of hole is reached.
  5. Leave the anchor undisturbed unitl the curing time elapses.
  6. Attach fixture and tighten the nut to the required torque.
_x000D_
_x000D_ _x000D_

_x000D_ R-STUDS

_x000D_
_x000D_
_x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_
SizeM8M10M12M16M20M24M30
Thread diameterd[mm]8101216202430
Hole diameter in substrated0[mm]10121418242835
Installation torqueTinst[Nm]10204080120180300
Min. hole depth in substrateh0[mm]hef + 5hef + 5hef + 5hef + 5hef + 5hef + 5hef + 5
Installation depthhnom[mm]8090110125170210270
Min. substrate thicknesshmin[mm]120130140180230270340
Min. spacingsmin[mm]0.5 * hef 400.5 * hef 400.5 * hef 400.5 * hef 400.5 * hef 400.5 * hef 400.5 * hef 40
Min. edge distancecmin[mm]0.5 * hef 400.5 * hef 400.5 * hef 400.5 * hef 400.5 * hef 400.5 * hef 400.5 * hef 40
_x000D_
_x000D_
_x000D_

_x000D_ Minimum working and curing time

_x000D_
_x000D_
_x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_
Resin temperatureConcrete temperatureCuring time*Working time
[°C][°C][min][min]
5-5480-
50240-
55150-
1010120-
151590-
202045-
253020-
254010-
_x000D_
_x000D_
_x000D_
Rawlplug's The nylon hammer fixing