R-CAS-V Vinylester capsule resin for concrete
Capsule for 24mm threaded rod
[Qty: 6/Box]
High-performance, quick-setting, styrene-free vinylester resin for concrete. Spin-in capsule for threaded rods where extreme strength is required.
Features and Benefits:
- Approved for use with threaded rods in non-cracked concrete (ETAG001 Option 7)
- High performance for use safety critical application - heavy-duty fastenings with small spacing and edge distances
- The system relies on the adhesion between the concrete and resin, which is free from expansion forces. This makes it an ideal choice where close edge and spacing distances are required
- Capsule contains precise amounts of ingredients making it a very consistent product
- Suitable for making fixings underwater. Adhesive strength is not affected by unpolluted water
- Suitable for dry or wet non-cracked concrete
- Styrene free - odourless
Applications
- Threaded rods
- Balustrading
- Railings
- Heavy machinery
- Structural steel
- Steel columns
- Cladding restraints
- Curtain walling
- Fencing & gates manufacturing and installation
- Formwork support systems
- Garage doors
- Guard rails
Base materials
Approved use in:
- Non-cracked concrete C20/25-C50/60
- Natural Stone
Installation guide
- Drill hole to the required diameter and depth for socket size being used.
- Clean the hole with brush and hand pump at least four times each. It is very important and necessary before installation.
- Insert capsule into the hole. Connect stud to drilling machine using appropriate driver system.
- Position the stud into the glass capsule then switch on the drilling machine and drive stud into the capsule. Switch off the drilling machine as soon as the bottom of hole is reached.
- Leave the anchor undisturbed unitl the curing time elapses.
- Attach fixture and tighten the nut to the required torque.
_x000D_
_x000D_
_x000D_
_x000D_ R-STUDS
_x000D__x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
Size | _x000D_M8 | _x000D_M10 | _x000D_M12 | _x000D_M16 | _x000D_M20 | _x000D_M24 | _x000D_M30 | _x000D_||
Thread diameter | _x000D_d | _x000D_[mm] | _x000D_8 | _x000D_10 | _x000D_12 | _x000D_16 | _x000D_20 | _x000D_24 | _x000D_30 | _x000D_
Hole diameter in substrate | _x000D_d0 | _x000D_[mm] | _x000D_10 | _x000D_12 | _x000D_14 | _x000D_18 | _x000D_24 | _x000D_28 | _x000D_35 | _x000D_
Installation torque | _x000D_Tinst | _x000D_[Nm] | _x000D_10 | _x000D_20 | _x000D_40 | _x000D_80 | _x000D_120 | _x000D_180 | _x000D_300 | _x000D_
Min. hole depth in substrate | _x000D_h0 | _x000D_[mm] | _x000D_hef + 5 | _x000D_hef + 5 | _x000D_hef + 5 | _x000D_hef + 5 | _x000D_hef + 5 | _x000D_hef + 5 | _x000D_hef + 5 | _x000D_
Installation depth | _x000D_hnom | _x000D_[mm] | _x000D_80 | _x000D_90 | _x000D_110 | _x000D_125 | _x000D_170 | _x000D_210 | _x000D_270 | _x000D_
Min. substrate thickness | _x000D_hmin | _x000D_[mm] | _x000D_120 | _x000D_130 | _x000D_140 | _x000D_180 | _x000D_230 | _x000D_270 | _x000D_340 | _x000D_
Min. spacing | _x000D_smin | _x000D_[mm] | _x000D_0.5 * hef 40 | _x000D_0.5 * hef 40 | _x000D_0.5 * hef 40 | _x000D_0.5 * hef 40 | _x000D_0.5 * hef 40 | _x000D_0.5 * hef 40 | _x000D_0.5 * hef 40 | _x000D_
Min. edge distance | _x000D_cmin | _x000D_[mm] | _x000D_0.5 * hef 40 | _x000D_0.5 * hef 40 | _x000D_0.5 * hef 40 | _x000D_0.5 * hef 40 | _x000D_0.5 * hef 40 | _x000D_0.5 * hef 40 | _x000D_0.5 * hef 40 | _x000D_
_x000D_ Minimum working and curing time
_x000D__x000D_
_x000D_
_x000D_
_x000D_
_x000D_
_x000D_
Resin temperature | _x000D_Concrete temperature | _x000D_Curing time* | _x000D_Working time | _x000D_
[°C] | _x000D_[°C] | _x000D_[min] | _x000D_[min] | _x000D_
5 | _x000D_-5 | _x000D_480 | _x000D_- | _x000D_
5 | _x000D_0 | _x000D_240 | _x000D_- | _x000D_
5 | _x000D_5 | _x000D_150 | _x000D_- | _x000D_
10 | _x000D_10 | _x000D_120 | _x000D_- | _x000D_
15 | _x000D_15 | _x000D_90 | _x000D_- | _x000D_
20 | _x000D_20 | _x000D_45 | _x000D_- | _x000D_
25 | _x000D_30 | _x000D_20 | _x000D_- | _x000D_
25 | _x000D_40 | _x000D_10 | _x000D_- | _x000D_
Rawlplug's The nylon hammer fixing