Reversible pneumatic drill
The pneumatic drill is ideal for drilling in a production line.
The drill has non-variable speed set to 550 rpm.
A compressor is required with an air flow delivery of at least 170 l/min at 6.3 Bar to make use of the drill.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT OIL).
| Description | Specification |
| Working pressure | 6.3 Bar |
| Free speed | 550 rpm |
| Average air consumption | 170 l/min |
| Suggested minimum compressor HP | 2 HP |
| Chuck size | 13mm |
| consider safety for your health and the people around you | |||
General safety suggestions:It is advisable to always have the following items nearby and in a good condition
|
|||
 |
 |
 |
 |
|
Wear Gloves
|
Eye Protection
|
Hearing Protection
|
Dust Mask
|
| Part No | Description |
| 1 | Air inlet |
| 2 | Exhaust Deflector |
| 3 | Spring Pin |
| 4 | Housing |
| 5 | Spring |
| 6 | O-Ring |
| 7 | Valve Stem |
| 8 | O-Ring |
| 9 | Reverse Lever |
| 10 | Trigger |
| 11 | Screw |
| 12 | Bearing |
| 13 | Rear Plate |
| 14 | Steel Ball |
| 15 | Cylinder |
| 16 | Rotor |
| 17 | Rotor Blade |
| 18 | Steel Ball |
| 19 | Front Plate |
| 20 | Bearing |
| 21 | Washer |
| 22 | Gear Link |
| 23 | Gear |
| 24 | Pin |
| 25 | Gear Plate |
| 26 | Gear Shaft |
| 27 | Shaft |
| 28 | Bearing |
| 29 | Clamp Nut |
| 30 | Washer |
| 31 | Drill Chuck |
| 32 | Chuck Screw |
| 33 | Bushing |
| 34 | O-Ring |
