Triple Flute router bit
Decorative profile
Give your furniture and cabinets a classic, architectural look with this unique
molding router bit. Perfect for chair rails, crown molding, door casings, trim,
pilasters, window casing/sills, baseboards and picture frames, you can use the full
profile, or just a portion of it to achieve the look you want.
The timber is held securely against the fence and the bit makes the cut. This leaves you free to feed the timber steadily - and your hands can safely be a long way from the cutters. Plan to cut the profile in several passes - taking only a small amount off on the last cut to get the best quality. Features two flutes and a 5/8' ball bearing guide.
This two-flute router bit is well balanced, eliminating vibration that degrades the cut finish.
This router bit has a 6.35mm shank (shaft) that will fit most small or large routers with the correct size collet. Please ensure that you select a router bit with a shank (shaft) size that will fit into your router collet.
PRO-TECH router bits are manufactured in Taiwan.
Router Bit Maintenance
_x000D_Fortunately, this is pretty easy. The best way to prolong the life of a router _x000D_ bit is to keep it clean. And what you need to do varies with the type of bit._x000D_
_x000D_Note: Sharpening is extremely important too.
_x000D_Bits with Bearings:
_x000D_To clean bits with bearings, first, remove the bearing. Then clean the bit as _x000D_ you did with non-bearing bits.
_x000D_It's important to remove the bearings because even though router bearings are _x000D_ 'sealed,' resin remover can sneak in and dissolve the bearing grease. If this were _x000D_ to happen, you would be faced with the problem of trying to lubricate a sealed bearing._x000D_
_x000D_Despite the claims of bearing grease sellers, we've never had much luck with _x000D_ this. Once that grease is gone, just go buy a new bearing.
_x000D_Bit Shanks:
_x000D_Periodically inspect the shanks of your router bits for rust or burrs. Either _x000D_ of these can be removed quickly with ScotchBrite®. Left on, they can _x000D_ interfere with your ability to properly tighten the bit in the collet.
_x000D_| Part No. | _x000D_Shank dia. | _x000D_Cutting width | _x000D_Cutting Height | _x000D_Radius | _x000D_
| KP360011 | _x000D_1/4 inch | _x000D_7/8 inch | _x000D_1 inch | _x000D_1/8 inch | _x000D_
| 6.35 mm | _x000D_22.2 mm | _x000D_25.4 mm | _x000D_3.2 mm | _x000D_
_x000D_
Length of Shank: 31.8 mm
_x000D__x000D_
_x000D_
_x000D_
_x000D_
